Zenoah PUM Parts

 Zenoah PUM Parts

Walbro Throttle Shaft Zenoah Piston Pin 28mm
Throttle Shaft for Walbro WT CarburetorsZenoah Piston Pin 28mm

Throttle arm for most Walbro WT-style carburetors. Allows mounting of swivel and cable. Walbro Part # 30-147 Stock part on the CY23RC

28mm length piston pin for connecting piston and crankshaft on 34mm Zenoah engines - fits G260RC / G260PU / G260PUH / G260PUM. Also fits Chung Yang CY26RC, CY27RC, and CY29RC engines. Zenoah part # 1600-41310.

$4.00

$3.00

Zenoah 260 Crankcase Bearing Set Zenoah Engine Bearing
Zenoah 260 Crankcase Bearing SetZenoah Engine Bearing

Zenoah engine bearing set. Fits: G23LH / G230RC / G260RC / G260PU / G260PUH / G231PUH / G231PUM / G260PUM / GZ25N14 / GZ25N23 engines. 

One (1) Zenoah engine bearing. Two bearings needed per engine. Zenoah part # 1155-21240 Stock part on the Zenoah G230 260RC (use 2) G240 270 290 (2 of the 3 bearings) G200PU, 231PUM, 260PUM, 231PUH, 260PUH GZ25N14 GZ25N23 23LH

$18.00

$10.00

Walbro Metering Diaphram Cover LH / PUM / PUH Complete EZStarter Assembly Kit
Walbro Metering Diaphram CoverLH / PUM / PUH Complete EZStarter Assembly Kit

Walbro metering diaphragm cover for WT / WA series carburetors without primer bulb (e.g. WT-257, etc). Walbro part # 21-158-1.

LH / PUM / PUH Complete EZ Starter Assembly Kit. Includes all the parts shown.

$2.00

$45.00

Zenoah Flywheel Key Zenoah Grey Coil
Zenoah Flywheel KeyZenoah Grey Coil

Zenoah woodruff key for flywheel. Fits G230RC / G260RC / G260PU / G260PUH / G231PUH / G231PUM / G260PUM / G23LH / G43L / G62 / GZ25N14 / GZ25N23 / G2D engines. 

Ignition coil for Zenoah 231PUM/260PUM/231PUH/260PUH/G62PU engines. PMW part # 4637. Zenoah part # 2629-71311.

$1.95

$39.00

Billet Intake Manifold Walbro K10-WAT Rebuild Kit
Teflon Gasket SetWalbro WT-813/ WT-257 / WA-167 Rebuild Kit K10-WAT

Replacement Teflon gasket set for use with the Redline Billet Intake Manifold.

Rebuild kit for Walbro WT-813 / WA-167 / WT-257 carburetors. Walbro part # K10-WAT.

$11.95

$8.00

Modified Walbro WT-257 Carburetor Zenoah Redline CNC Mod Piston 28.5cc, 29.5cc, 30.5cc
Walbro WT-257 Modified CarburetorZenoah CNC Modified Piston 28.5cc, 29.5cc, 30.5cc

Modified Walbro WT-257 Enlarged opening in carb, also the intake angle has been reshaped for better flow.

This is the Redline CNC Modified 25.4 piston. Very light in weight, allowing a quicker throttle response and more rpm. Maintains strength and durabality. This piston can be used on any modified or stock Zenoah 260 PUM motor.

$55.00

$45.00

Zenoah Oil Seal Set Piston Pin Washer Set
Zenoah Oil Seal SetPiston Pin Washer Set

Zenoah oil seal set for crankcase. G23LH / G230RC / G260RC / G260PU / G260PUH / G231PUH / G231PUM / G260PUM / GZ25N14 / GZ25N23 engines. 

Piston Pin Washer Set

$6.00

$3.00

Zenoah 30mm (+2mm) Crankshaft for Watercooled Engines Zenoah 29mm (+1mm) Crankshaft for Watercooled Engines
Zenoah 30mm (+2mm) Crankshaft for Watercooled EnginesZenoah 29mm (+1mm) Crankshaft for Watercooled Engines

Zenoah 30mm (+2mm) crankshaft for Watercooled Engine.

Zenoah 29mm (+1mm) Crankshaft

$55.00

$55.00

Zenoah Connecting Rod Bearing Chung Yang +2mm Stuffed Crankshaft (30mm total)
Zenoah Connecting Rod BearingZenoah 290PUM 36mm Big Bore Kit

Zenoah piston pin bearing. Fits G230RC / G260RC / G260PU / G260PUH / G231PUH / G231PUM / G260PUM / GZ25N14 / GZ25N23 engines. 

This is the long-anticipated Zenoah 36mm 29cc bigbore kit for PUM engines!  This kit will fit Zenoah G231PUM/G260PUM engines, or any engine running the 4-bolt  Zenoah marine crankcase.. 

$4.75

$89.00

Zenoah 260 34mm Piston Ring
Zenoah 260 34mm Piston Ring

Zenoah piston ring for 34mm engines. Fits G260RC / G260PU / G260PUH / G260PUM engines. Also fits Chung Yang 26cc engines. PMW part # 4310R. Zenoah part # T2088-41210.

$6.00